S1205BE – 2016MY Registration Manual For Immobilizer 1 IMPORTANT 3 What to Prepare 3-2 Others 4 B type 4-1 Adding Keys 4-2 Registering Body Integrated Unit 4-3 Registering Engine Control Module 4-4 Registering Combination Meter or Security CM 4-5 Deleting Immobilizer Key ID 4-6 Registering Remote Engine Start CM 4-7 Immobilizer system Correspondence table at … Read more
NUMBER: 12-187-15 DATE: 07/27/15 APPLICABILITY: 2015MY WRX and STI Models SUBJECT: Design Change to Trunk Latch Assembly INTRODUCTION This bulletin announces a design change to enhance the operation of the trunk latch mechanism and prevent it from releasing immediately after closing. PRODUCTION CHANGE INFORMATION: The new latch assembly was incorporated into production on … Read more
NUMBER: 05-60-15R DATE: 07/27/15 REVISED: 06/13/16 APPLICABILITY: 2006-2009MY Legacy Spec B and 3.0R Limited Models with Bilstein Front Struts SUBJECT: Rattling Sound from Front Suspension While Driving Inspection Method for Loose Strut Retaining Nut INTRODUCTION This bulletin provides an inspection method for the threaded portion of the front strut piston rod. If you receive a customer … Read more
NUMBER: 12-171-15 DATE: 07/27/15 APPLICABILITY: 2013-14MY BRZ SUBJECT: Uneven Gap between Dash Pad and Center Air Vent Grille INTRODUCTION This bulletin will address customer concerns of an uneven gap appearing between the top of the center dash air vent grille and the instrument panel dash pad directly above it. The photo below shows the uneven … Read more
NUMBER: 09-59-14R DATE: 11/18/14 REVISED: 07/27/15 APPLICABILITY: 2015MY WRX Models with 2.0L DIT Engine 2015MY Legacy and Outback 2.5L SUBJECT: Rust Treatment Procedure for Heat Shield Retaining Bolt Heads INTRODUCTION This bulletin provides a treatment procedure to address a customer concern of rust developing on the front exhaust pipe heat shield retaining bolt heads as … Read more
