Design Change to Trunk Latch Assembly – 2015 Subaru WRX & STI

NUMBER: 12-187-15 DATE: 07/27/15 APPLICABILITY: 2015MY WRX and STI Models SUBJECT: Design Change to Trunk Latch Assembly   INTRODUCTION This bulletin announces a design change to enhance the operation of the trunk latch mechanism and prevent it from releasing immediately after closing.   PRODUCTION CHANGE INFORMATION: The new latch assembly was incorporated into production on … Read more

Uneven Gap between Dash Pad and Center Air Vent Grille – 2013-2014 Subaru BRZ

NUMBER: 12-171-15 DATE: 07/27/15 APPLICABILITY: 2013-14MY BRZ SUBJECT: Uneven Gap between Dash Pad and Center Air Vent Grille   INTRODUCTION This bulletin will address customer concerns of an uneven gap appearing between the top of the center dash air vent grille and the instrument panel dash pad directly above it.  The photo below shows the uneven … Read more

Rust Treatment Procedure for Heat Shield Retaining Bolt Heads – 2015 Subaru

Subaru Logo

NUMBER: 09-59-14R DATE: 11/18/14 REVISED: 07/27/15 APPLICABILITY: 2015MY WRX Models with 2.0L DIT Engine 2015MY Legacy and Outback 2.5L SUBJECT: Rust Treatment Procedure for Heat Shield Retaining Bolt Heads   INTRODUCTION This bulletin provides a treatment procedure to address a customer concern of rust developing on the front exhaust pipe heat shield retaining bolt heads as … Read more

Interference between the Fender and Side Marker Lamp – 2013 Subaru BRZ

NUMBER: 07-94-15 DATE: 07/23/15 APPLICABILITY: 2013MY BRZ SUBJECT: Interference between the Fender and Side Marker Lamp   INTRODUCTION This bulletin provides a repair procedure to address concerns of contact between the top horizontal edge of the side marker lamp and the corresponding fender edge as shown in the photo to the right.     PART INFORMATION … Read more

Unnecessary Power Window Switch Replacements – 2015-2017 Subaru Legacy & Outback

2016 Subaru Legacy

NUMBER: 07-93-15 DATE: 07/23/15 APPLICABILITY: 2015 MY and Later Legacy and Outback Models with Auto-Up / Down Power Window Feature SUBJECT: Unnecessary Power Window Switch Replacements   INTRODUCTION This Service Information bulletin provides the procedure to follow when receiving a customer concern regarding operation of their power window Auto-Up and/or Auto-Down feature.  Testing of returned power … Read more